HOMEOptions and accessories
OPTION
When introducing AGVs, we offer a variety of options to accommodate a wide variety of production lines.
Communication features
You can select the equipment that best suits your line environment, such as wireless communication to prevent interference between AGVs and optical communication devices that can give instructions for starting.
Remote control (infrared)
Optical communication equipment
Simple call switch
Intersection traffic control radio
Automatic Charger
Using an automatic charger means you no longer need to replace batteries.
Non-contact type
The AGV can be charged without touching the contactor of the ground station. To use non-contact charging, the user must apply in advance for high-frequency equipment to the Ministry of Internal Affairs and Communications' General Communications Bureau of the prefecture in charge.
Contact Type
The AGV stops in front of the ground station and the contactor slides to come into contact with the AGV to charge it.
Traction device
We offer manual types, automatic detachable types, and automatic removable types.
Electric Pin Hook
Automatic detachable hook
Automatic hook release
Manual towing hook
Safety Device
Standard specifications include a collision prevention function (obstacle sensor), emergency stop switch, and abnormality warning.
Optional features include a signal tower/rotating light, melody unit, bumper switch, etc.
Can be equipped with the high-performance detection area adjustable obstacle sensor and laser obstacle sensor.
Maintenance Tools
A strong ally for the Conservation Group!
Wireless connection via tablet is possible, eliminating the need for connector connection during maintenance. This allows remote control of AGV movement under the trolley, which is out of reach, and input/output of parameters for the driving program.
Battery replacement trolley
Battery replacement trolley
If you are working in a two- or three-shift system, you can replace the battery with a spare one.
We have a replacement trolley available to make replacement easier.
battery
Using an automatic charger means you no longer need to replace batteries.
Lead-acid battery (12v x 2)
Lead-acid batteries allow you to select the capacity according to the operating time.
Lead-acid battery-compatible lithium-ion battery (12v x 2)
Lithium-ion batteries with the same capacity as lead batteries (38Ah/50Ah/80Ah).
The lead battery of the AGV you are waiting for can be changed to a lithium-ion battery without changing the charger.
Lithium-ion battery (24v x 1)
It has a short charging time and a long life.
switch
Each AGV is equipped with a switch, which can be operated by each individual AGV.
Membrane Switch
Standard equipment models: Low-floor series, Eight series, DB type, high-speed outdoor (mechanical switch is optional)
Mechanical Switches
Standard equipment models: Cart type, standard outdoor, CP type
Other options and accessories
● Magnetic cable 20m/piece
● Magnetic bar (for embedding spot markers, 3 used/location)
● Magnetic tape 25m/roll
● Spot marker (1 used/location)
● Protective tape 30m/roll, 20m/roll
● Address marker (for absolute addresses)
● Tyre chip (RFID)
● Urethane wheels (drive wheels/driven wheels)
● Motor brake
● Battery tray
● Battery transport cart (for battery replacement)
Integrated control (individual estimate)
Integrated control of each AGV using wireless technology